BOYER POWERBOX

SINGLE PHASE POWER BOX

 
 
 
INPUT: Any permanent magent alternator singlr phase 2 or 3 wire up to 180 watts.
 
OUTPUT: 13 - 14 Volts Direct Current [DC] [charging 12 volts].
 
MOUNTING: 4 x 6mm holes @ 45mm x 75mm centres.
 
SIZE: 66mm Long x 62mm Wide x 35mm High. 92mm x 66mm Over mounting flange.
 
WEIGHT: 200 grams
 

 

 

Mount the unit in free air, this can be in a battery box but some air cooling is required.
 
Use rubber vibration mountings for severe conditions.
 
Never connect the battery the wrong way around. A fuse must be placed in one end of the battery connections.
 
When running without a battery, no fuse is required and it is in order to short the output to stop the engine.
 
Wiring Diagram for POSITIVE earth.
 
Boyer Powerbox Wiring Diagram
ator Wiring
 

BACK
1