All Scale Car Rules.
1:32 Womp – Womp 13D
Body
- TBA
Chassis
- Parma 572 Steel and Parma 573 Brass.
- Champion 401 Thumper and Legends Chassis
- All original dimensions, mounting points and basic configuration must be retained
- No chassis modifications.
- No soldering allowed, to hold the motor into position; only motor screws are to be used.
- Body tape may be used to hold lead wires in place.
- Original body clips must be used.
Front Axle
- 1/8” solid only
Front Wheels
- Original 1/8” only, O-Ring type permitted, minimum diameter is 17mm.
Rear Axle
- 1/8 solid only.
- Oilite type bushings only, may be soldered or glued in place.
Gears
- Any plastic 48 or 50 pitch crown gears for 1/8 axle.
Pinion
- Any 48 or 50 pitch.
Motor
- Only 13D Plafit Fox II Motor. Sealed Motors are not to be opened or modified in any way.
***
Back to National Rules Page
