Australian Slot Car Racing Rules 2004
Please note these rules are NOT the Official rules for the 2004 National Race.
GROUP 10 Sedan Specifications Under 16s
Race Duration
Qualifying ________1 minute/no byes
Consie___________ 2 minute brackets/1minute lane change
Heats____________ 2 minute brackets/1 minute lane change
Semi Final ________2 minute brackets/l minute lane change
Final ____________ 3 minute brackets/2 minute lane change
BODY
- Sunset Lotus GT 40
Chassis
- Any Parma, Taiwan, Racer, Champion, JK or Slotworks pressed steel Group 10 type chassis may be used.
All original dimensions, mounting points and basic configuration must be retained with the following exceptions.
- Plating may be removed to facilitate soldering of chassis parts.
- Rear axle tube and/or wire motor brace may be added.
- Motor may be soldered in position.
- Rear axle height may be altered providing no material other than plating is removed from chassis.
- Body tape may be used to aid chassis performance.
- Front axle may be soldered in place or braced with wire to prevent rotation.
- Maximum front axle diameter - .062"
- Front wheel retainers may be substituted and/or soldered in place. "NO WING CAR WHEELS"
- Original pins must be used.
Rear Axle
- 1/8th Solid only.
- Oilite type bushings only, may be soldered or glued in place.
Gears
- Any unmodified 48 pitch gears.
Pinion
- Size Restricted to 8 or 9 teeth only.
Motor
- Any Stock Parma Unbalanced 16D
These rule's do not belong to any association or group and they are just a copy of the slot car rules
being used at the 2004 National's and not the official rules.
BACK
Australian Slot Car Web Links Page